4 thoughts on “What is a hot melt gum omosperum?”

  1. The hot melting glue omenture is a hot -melt rubber product, which has a similar appearance of non -woven fabrics, rolling packaging. It is solid and not sticky at room temperature. The environmentally friendly plastic adhesive can be widely used in the bonding of various materials and various uses.
    The hot melting glue
    Alias ​​that hot melt glue oments are different in all walks of life. , Double -sided paper lining, hot -melt hot lining, hot glue, etc. The reason why there are so many names is mainly because the use of the film’s film is a chemical industry product, and the personal use is rarely used. It is not a well -known product. Most of the names of them are also through the characteristics of its use and attributes.
    Paping hot melting glue mesh production is made by using professional equipment to melt the hot melting glue particles, and then it is made of melting spraying into a wire. One of the products, at present, this kind of production equipment is almost not sold on the market. Most of them are designed and manufactured independently based on their own experience and combined with advanced production concepts based on their own experience.
    The functional hot -melt rubber oments are the same as hot -melt rubber rods and hot -melt rubber membranes. They are all adhesives that can be used to stick two different materials together. Including: various types of fabrics, film, sponges, leather and other fields. Because it is based on hot -melt glue particles as the main raw material, it is a type of environmentally friendly adhesive, which can be widely used in the fields of clothing and clothing, car interior, shoe materials, daily necessities, home textiles and other fields.
    PA hot melting glue
    The category hot melting glue oments are classified as: PA, PES, EVA, TPU, etc., hot -melt rubber oments with different ingredients, elasticity, use temperature, use temperature, use temperature The area of ​​the application and the materials suitable for bonding are different. For example, in the use of bonding fabrics, most of the high -temperature PA hot -melt gum omosum is used. The product melting point is about 125 ° C. Most of the EVA hot -melt gums are used, and the product melting point is about 70 ° C.
    The hot melting glue ketic has two models: white hot -melt glue and black hot melting glue omentum according to color classification. The conventional is white, and it is also the original color of raw materials (hot melting glue particles), but in order to satisfy the satisfaction of satisfaction For some of the customer groups, we develop a black hot -melt gum omosum, which adds special materials to the conventional hot -melt glue particles to change the color, but they are not different in terms of use. You can choose according to your actual needs. However, black hot -melt glue oments are currently only made of PA, with small specifications, high costs, high order, and no special needs. It is not recommended to choose black.
    The hot melting glue ketic is classified according to structure, divided into single layers and double layers. The so -called single layer is only a hot -melt rubber omentum with only one layer of structure, also known as hot -melt gum omentum without separate paper paper It is a solid charm at normal temperature, but double -sided double -sided at high temperature is sticky. It is also a conventional hot -melt glueplane product; and the double -layer refers to There is a layer of separation paper (the oil paper similar to the back of the courier single), which is to meet the deliberately developed varieties of customer groups that meet the needs of some production process. The product cost is high and the market demand is small. Single -layer and double -layer hot -melt gum omosums are fundamentally different in use, and will be described in the following content.
    PES hot melting glue
    The biggest feature of hot -melt glue and double -sided bonding lining is that it has excellent breathability. Because it is a omentum shape made by spraying the process, its glue molecules leave a gap between each other, which can enable the product that uses this adhesive to maintain Performance, for example, in the composite of the fabric, the glue will not completely block the mesh of the fabric after melting, which can still have good breathability, which is also the characteristic of other adhesives such as hot melt glue film.
    In addition to good breathability, the effect of the feel of the fabric when the hot -melt gum omosperum is fitted is also small. Low, that is to say, the amount of glue is lower, and there is a gap between the rubber molecules, which further makes the furniture feel less hard. Of course The impact will be greater.
    If in addition to different materials, hot -melt glueplates have different weights and widths and classifications of each roll of rice.
    . On the weight of grams, the most commonly used hot melting glue omenture, which is a medium -sized model, and the thinner of 12G and 15G hot melting glue, 40g, 60g, etc., “G, etc.,” G, etc., “G, etc. “The unit is” gram “, which represents the weight of a square meter product. The weight of gram can be customized according to customer needs. The hot -melt double -sided lining of different materials is also different. The scope of gram is 8-120g/㎡, while the EVA hot-melt gum containe is only 15-80g/㎡.
    eva hot -melt glue
    In wide amplitude, the conventional width mainly includes 1 meter (1000mm) and 1.5 meters width (1500mm). ) 1cm and 2cm are also common specifications. Specific customization can be customized according to customer needs. Since the company adopts a relatively advanced production process, the customized range of its width can reach between 10mm and 3200mm. The relatively traditional equipment width is only 1600mm width of 1600mm Essence
    . The number of rice per roll is determined based on gram. For example, 25G hot -melt gum omosums are 500 meters/volume, and 12G hot -melt gum omosum can be reached 1000 meters/volume. The larger the thick -melt gum, the thick, the smaller the number of rice per roll, such as 90g of the omentum, a roll of only 50 meters. Of course, we also support customization.
    The method of use of regular hot -melt glue oments (single -layer) and hot -melt gum omosum (double layer) with separate paper are different in use. Conventional hot -melt rubber omentum required Place it in the middle of the two layers of materials that are bonded, and then use the pressure -per -hot equipment to warm and iron on one of the materials, fit these three layers of materials together to complete the compound; while the heat with the hot paper is hot; while the heat with the hot paper is hot; the heat with the hot paper is hot; the heat with the hot paper is hot; the heat with the hot paper is hot; the heat with the hot paper is hot; the heat with the hot paper is hot; the heat with the hot paper is hot; the heat with the hot paper is hot; the heat with the hot paper is hot; the heat with the hot paper is hot; the heat with the hot paper is hot; The melting glue film needs to be heated on one side of the icing paper when using it, and the hot -melt glue omentum is pre -passed on one side of the bonded material, then removed the back covering paper, and then sticks to the other side with the other side. The loaded materials are fitted.
    This permeability can be an iron, a flat -plate permeal or a more professional flat plate composite, a drum composite machine, etc.
    The differences between the hot melting glue film? After reading the above content, I know that there is actually a fundamental difference between them. Here I will briefly outline their main differences to help everyone find the hot -melt sticky glue products that are suitable for them.
    1. Different property characteristics brought by different production processes
    I because hot -melt glue film is processed by blowing plastic, scraping, pressure extension and other processes. The glue omenture, the glue film is not breathable after use. At the same time, the craft also determines that the glue film content is much higher than that of the retina. The negative effects brought about is that the feel is too hard and the cost is high. The hot -melt glue film is also divided into single -layer and double -layer structure, similar to the omentum in use.
    2, the difference between ingredients
    has more types of hot -melt glue film, not only PA, PES, EVA, and TPU, but also PO and EAA ingredients, which makes the application of the glue film wider, and the use The range is wider, and even the same ingredients, the hot -melt glue film still has many subdivisions, such as the hot -melt rubber film of the TPU ingredient, it is divided into low temperature, high temperature, high temperature (high bomb), etc., to meet different user groups Demand.
    In short, hot -melt glueplane film is a relatively new type of environmentally friendly hot -melt adhesive product. It is believed that in the future market, it will be popularized with such products. Planting products.
    The above is the introduction of hot -melt gum retina (hot -melt double -sided lining). If you need to learn more, you can leave me a message.

  2. (1) Hot melting glue omenture is a non -woven high -molecule thermoplastic adhesive. The raw materials are usually PA, PES, EVA, TPU and other high -molecular particles. After the feeding, grind it into ultra -fine powder, melt the wire at high temperature, and use the hot -melt rubber particles squeezed out of the hot -melting pores of the mold head. The stream of traction stretch, thereby forming an ultra -fine glue fiber, relying on its own viscosity and combination into different grams of net -shaped thin layer. After several cooling processes, it is condensed on the meson curtain or drum. Cut into the required door width, packaging molding.
    The hot melting glue
    (2) Classification of hot -melt rubber omentum: divided into PA hot -melt gum, PES hot melting gum, EVA hot melting omentum, TPU Hot melting glue.
    The hot melting glue
    (3) The hot melting glue of each material has different melting points. Depending on the composite materials, the hot melting glue omentum of different melting points is Can.

  3. The hot melting glue omin is a hot melting glue product. It belongs to a adhesive. It melts the hot melting glue at high temperature and then uses the wire to make the mesh tulle Essence
    This film film
    MST’s common materials for hot melt glue oments are EVA, TPU, PES, PA, etc. Because the hot melting glue is a adhesive product based on hot -melt glue, it uses a hot -melt -cold solidification method, it has extremely high production efficiency. In addition, because there is no solvent, the solid content is 100%, so hot -melt glueplane film is also an environmentally friendly glue sticky product, which is a direction for future adhesive products.

  4. Hot -melt oscope is a non -woven -like hot -melt glue product that can easily perform continuous or intermittent operations. This product can be widely used in all kinds of fabrics, paper, polymer materials and metals. The hot-melt oscillus includes two series of PA and PES, with a weight of 8-100 grams per square meter.
    product application:
    ■ Costume industry fabric bonding
    ■ The car industry fabric foam and board bonding
    ■ indoor product fabric bonding
    ■ Filter material more Layer bonding
    ■ luggage industrial fabric bonding
    ■ Building decorative fabric adhesion

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Scroll to Top